Chelsio Communications N210 Guia do Utilizador Página 5
- Página / 32
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
5 | P a g e
Confidential
Hardware Installation
1. Shutdown and power off your system.
2. Power off all remaining peripherals attached to your system.
3. Unpack the Chelsio Ethernet adapter and place it on an anti-static surface.
4. Remove the system case cover according to the system manufacturer‟s instructions.
5. Remove the PCI filler plate from the slot where you will install the 10Gb Ethernet
adapter.
For maximum performance, it is highly recommended to install the adapter into a PCI-X slot
running at 133Mhz or PCIE x8 slot.
6. Holding the Chelsio Ethernet adapter by the edges, align the edge connector with the PCI
connector on the motherboard. Apply even pressure on both edges until the card is firmly
seated. It may be necessary to remove the XFP/SFP (optics) modules prior to inserting the
adapter.
7. Secure the Chelsio Ethernet adapter with a screw, or other securing mechanism, as
described by the system manufacturer‟s instructions. Replace the case cover.
8. Connect a fiber cable, multi-mode for short range (SR) optics or single-mode for long
range (LR) optics, to the 10Gb Ethernet adapter or regular Ethernet cable for the 1Gb
Ethernet adapter.
- 2 2
- Confidential 2
- Table of Contents 3
- Introduction 4
- Hardware Installation 5
- “Next” 8
- Click on “Finish” button 12
- Driver 13
- Click on “OK” button 14
- Click on “Close” button 20
- Virtual Bus Driver 21
- 23 23
- 24 24
- 25 25
- 26 26
- 27 27
- 28 28
- 29 29
- 30 30
- 31 31
- 32 32
Manuais e produtos relacionados com Placas de rede Chelsio Communications N210
(33 páginas)Tripp Lite SU12000RT4U Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Unterbrechungsfreie Stromversorgungen (USVs) Tripp Lite SU12000RT4U.
Wir stellen 2 PDF-Handbücher Tripp Lite SU12000RT4U zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt, Bedienungsanleitung
Comentários a estes Manuais