Chelsio Communications Chelsio T5 Guia do Utilizador descarregar pdf (Página 183)

100

101

Chapter XI. FCoE Full Offload Initiator

Chelsio T5/T4 Unified Wire For Linux Page 183

4.2.2. Verifying the target discovery

To view the list of targets discovered on a particular FCoE port, use the following commands:

i. Check for the adapter number using the following command.

[root@host]# cxgbtool stor –s

ii. To check the list of targets discovered on a particular FCoE port, first determine the wwpn of

the initiator local port under sysfs. The hosts under fc_host depends on the number of ports

on the adapter used.

[root@host]# cat /sys/class/fc_host/hostX/port_name

iii. After finding the localport, go to the corresponding Remote port under sysfs # cat

/sys/class/fc_remote_ports/rport-X:B:R where X is the Host ID, B is the bus ID and R is

the remote port.

Alternatively, the local ports can also be found using cxgbtool

[root@host]# cxgbtool stor –a <adapter no> --show-lnode

R can correspond to NameServer, Management Server and other initiator ports

logged in to the switch and targets.

Note

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 459 460

Comentários a estes Manuais

Sem comentários

Chelsio Communications Chelsio T5 Guia do Utilizador Página 183

Comentários a estes Manuais

Manuais e produtos relacionados com Software Chelsio Communications Chelsio T5