Chelsio Communications Chelsio T5 Guia do Utilizador descarregar pdf (Página 251)

100

101

Chapter XVIII. Classification and Filtering

Chelsio T5/T4 Unified Wire For Linux Page 251

iii. Configure the RSS Queue corresponding to trace0 filter configured above. Determine the

RspQ ID of the queues by looking at Trace QType in /sys/kernel/debug/cxgb4/<bus-

id>/sge_qinfo file.

[root@host]# cxgbtool ethX reg 0x09808=<Trace-Queue0- RspQ ID >

iv. Similarly for other direction and for multiple ports run the follow commands:

[root@host]# echo rx0 snaplen=40 > /proc/driver/cxgb4/<bus_id>/trace1

[root@host]# echo tx1 snaplen=40 > /proc/driver/cxgb4/<bus_id>/trace2

[root@host]# echo rx1 snaplen=40 > /proc/driver/cxgb4/<bus_id>/trace3

[root@host]# cxgbtool ethX reg 0x09ff4=<Trace-Queue1- RspQ ID >

[root@host]# cxgbtool ethX reg 0x09ffc=<Trace-Queue2- RspQ ID >

[root@host]# cxgbtool ethX reg 0x0a004=<Trace-Queue3- RspQ ID >

Use “snaplen=60” in case of IPV6.

Note

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 459 460

Comentários a estes Manuais

Sem comentários

Chelsio Communications Chelsio T5 Guia do Utilizador Página 251

Comentários a estes Manuais

Manuais e produtos relacionados com Software Chelsio Communications Chelsio T5